RY30MK PRO 30 Gallon Crack Sealer Melter Oven
$3,599.00
The RY30MK-PRO is the world’s first 30-gallon Direct Fired Crack Fill Melter Kettle engineered with dual burners for ultra fast melting of crack sealer. This unit is for crack sealing professionals working on bigger jobs looking for a way to increase efficiency and profitability.
The RY30MK Pro V2 is the most efficient crack filler melter kettle in it’s class. Contractors serious about saving time, and being as efficient as possible this is the machine for you! Spend less time waiting for material to melt, and focus on the metric that makes you more money feet of crack fill applied per hour.
- SAFER: Flame-out Sensors means no dangerous backflashes or flame-outs commonly caused by wind. Plus, it is full equipped with CSA/UL approved regulator to provide precise control over fuel flow to the kettle.
- FASTER: Dual halo burners melt crack filler 50% faster compared to traditional torch melters.
- TOUGHER: Steel design means virtually no maintenance.
Award Winning Productivity
Up to 50% Faster melting of crack sealant when compared to torch fired models! Melt and apply up to 9600 ft of crack sealant / day. The twin sealed burner system consume close to 50% less than torch fired machines. The RY30 MK Pro is the fastest, most efficient unit on the market today.
RY30MK Pro V2 Crack Fill Kettle Melter Features
- Convenient Push Button Start.
- 100,000 BTU Sealed dual halo burners are protected from the elements and eliminates flame outs that are common in torch fired models.
- Glycerin thermometer for accurate temperature readings. The thermometer is resistant to damage from vibration while using machine.
- Equipped with strainer to prevent clogs that can be caused by un-melted pieces.
- 2″ Molasses Valve for fast, easy method of dispensing melted crack sealer.
- Lift Handles make transport of melter kettle a breeze.
Specifications
- Fluid Capacity – 30 Gallons
- Kettle Steel Thickness – 14 Gauge
- Assembled Dimensions – 48.6″ x 24.8″ x 37.7″
- Empty Weight – 257 lbs / 116.8 kg
- Max Capacity Weight – 551 lbs / 250.4 kg
- Fuel Type – Propane
- Max Fuel Pressure – 5 psi
- Burner Type – Dual 50,000 BTU/hr Cast Iron Sealed Burners
- Valve Type – 2″ Molasses Valve
- Agitation Type – Manual
*** Free shipping only applies to Alberta, BC, Saskatchewan, Manitoba, Ontario, Quebec
- Description
- Additional information
- Reviews (0)
- Documents
Description
A 30 gallon melter kettle for bigger crack sealing jobs
A melter kettle melts and holds crack sealant; you draw the hot material through the valve into a pour pot or bander. The RY30MK Pro V2 holds 30 US gallons, three times the 10 gallon RY10MK Pro, so it suits crews running bigger jobs or feeding more than one applicator.
Dual burners
The RY30MK Pro has two independently operated 50,000 BTU/hr sealed burners. Run both for a faster pre-heat, or run one to save fuel and hold temperature when melting speed matters less. It starts with a push-button electronic ignition.
Features
- Twin sealed cast iron burners shielded from the elements. They virtually eliminate wind flame-outs.
- CSA/UL approved flame-out sensor that shuts off fuel to the burner if the flame goes out.
- 2 inch molasses valve for dispensing melted crack sealer.
- Glycerin-filled thermometer, resistant to vibration damage.
- Adjustable safety clamps to keep the lid secured in transport.
- Lift handles for moving the kettle.
- Designed to stand alone or be bolted to a truck or trailer.
Manufacturer performance figures
RynoWorx states that the RY30MK Pro melts crack sealant up to 50% faster than torch-fired models, uses nearly 50% less fuel, and allows up to 9,600 feet of crack filler to be applied per day. These are the manufacturer’s figures from its sell sheet.
Specifications
| Fluid capacity | 30 US gallons |
|---|---|
| Kettle steel | 14 gauge |
| Assembled dimensions | 48.6 in x 24.8 in x 37.7 in |
| Empty weight | 257 lb (116.8 kg) |
| Max capacity weight | 551 lb (250.4 kg) |
| Fuel | Propane |
| Max fuel pressure | 5 psi |
| Burners | Dual 50,000 BTU/hr cast iron sealed burners |
| Valve | 2 in molasses valve |
| Agitation | Manual |
Specifications are RynoWorx’s published figures.
Common questions
10 gallon or 30 gallon? A larger kettle melts more material per load and suits bigger jobs or several crews drawing from one kettle. A 10 gallon kettle is lighter and easier to move.
Can it be mounted? Yes, designed to be free standing or bolted to a truck or trailer.
Does it apply the crack filler? No. It melts and holds the material. You dispense through the molasses valve into a pour pot or bander.
Where are the manual and parts diagram? On the Documents tab.
Additional information
| Weight | 122470.0 g |
|---|---|
| Dimensions | 101.6 × 40.64 × 96.52 cm |
Reviews
There are no reviews yet.