RY10MS Mastic Applicator
Original price was: $4,199.00.$3,599.00Current price is: $3,599.00.
The RY10MS was designed to be filled with hot crack filler from skid or trailer mounted mastic kettles. If you already have a kettle, and are looking for a more efficient way to fill cracks than a pour pot, the RY10MS is for you.
- 10 Gallon Fluid Capacity
- Made w/ 14 Gauge Steel
- Assembled Dimensions – 46.5″ x 31.4″ x 38.9″
- Empty Weight – 139 lbs / 63.2 kg
- Max Capacity Weight – 237 lbs / 107.7 kgs
- Max Fuel Pressure – 30 PSI
- Burner Type – 150,000 BTU / hr Heating Torch
- 5.5″ x 2.5″ Gate Valve
- Manual Agitation
The RY10MS was designed to load, dispense and maintain hot material directly from skid mounted or trailer mastic kettles.
A slanted, ultra-low-profile design allows you to confidently load mastic material from either the front or right side of the kettle.
Material flow is carefully controlled through a large, rectangular gate valve which places hot material near the centre of an easy-to-swap ultra-heavy duty 8″ square steel shoe.
- Handle mounted controls
- A slanted kettle promotes loading from the front of the machine
- Flow control
- Easy application
Increased Productivity
- Load, transport and apply thousands ofpounds of mastic material per day into alltypes of cracks, seams, joints, or potholes.
- Maintain and clean gate valve and chutewith an included, handlebar mountedclean-out tool.
Reliable & Easy to Opreate
- Large solid-steel wheels equipped with ball-bearings along with dual heavy-duty front castors make maneuvering and filling seams, cracks, or potholes a breeze.
- A rigid 14 gauge powder coated kettle easily keeps material at the application temperature, regardless of climate.
- The on-the-fly valve control paired with the easy-swappable steel shoe enables effortless dispensing and optional spreading of material.
- Handlebar mounted shoe control allows you to lower the shoe during application or keep it raised during transportation
Safety First
- Handle mounted controls keep the operator further from the hot kettle during operation.
- A slanted kettle promotes loading from the front of the machine, allowing for safer loading and assisting material flow
*** Free shipping only applies to Alberta, BC, Saskatchewan, Manitoba, Ontario, Quebec
- Description
- Additional information
- Reviews (0)
- Documents
Description
What the RY10MS mastic applicator does
The RY10MS is a wheeled applicator for hot mastic and crack filler. It does not melt the material. You pour pre-melted mastic into it from a mastic kettle, then dispense it into cracks, seams, joints and potholes through a controlled gate valve, instead of carrying and pouring from a hand pot.
How it fits in a crack fill setup
A mastic kettle melts and holds the material; the kettle to pair with the RY10MS is the RY30MK Pro 30 gallon melter kettle. The RY10MS takes that pre-melted material and applies it. RynoWorx designed its slanted, low-profile body so mastic can be loaded from the front or the right side, and a handlebar-mounted shoe control lets the operator lower the shoe to apply or raise it for transport.
If you already own a kettle and want a more efficient way to fill cracks than a pour pot, this is the machine RynoWorx built for that job. If you need one machine that melts and applies, look at the crack filling machines instead.
Features
- Large rectangular gate valve controls flow, placing hot material near the centre of an easy-to-swap 8 inch square steel shoe.
- Handlebar-mounted shoe control and on-the-fly valve control.
- Handle-mounted controls keep the operator further from the hot kettle.
- Included handlebar-mounted clean-out tool for the gate valve and chute.
- Solid-steel wheels with ball bearings and dual heavy-duty front castors for manoeuvring.
- Rigid 14 gauge powder-coated kettle. It keeps material at application temperature regardless of climate.
Specifications
| Fluid capacity | 10 US gallons |
|---|---|
| Kettle steel | 14 gauge |
| Assembled dimensions | 46.5 in x 31.4 in x 38.9 in |
| Empty weight | 139 lb (63.2 kg) |
| Max capacity weight | 237 lb (107.7 kg) |
| Fuel | Propane |
| Max fuel pressure | 30 psi |
| Heating torch | 150,000 BTU/hr |
| Valve | 5-1/2 in x 2-1/2 in gate valve |
| Shoe | 8 in square steel, swappable |
| Agitation | Manual |
Specifications are RynoWorx’s published figures.
Common questions
Does the RY10MS melt the mastic? No. You pour in pre-melted mastic from a kettle. Machines that melt and apply in one unit are the crack fill melter applicators.
Is a kettle included? No. The RY10MS is the applicator. You supply the kettle that melts the mastic.
What fuel does it use? Propane.
Is a manual and parts diagram available? Yes. The owner’s manual, warranty and parts diagram are on the Documents tab.
Additional information
| Weight | 63049 g |
|---|---|
| Dimensions | 99.06 × 121.92 × 51.0 cm |
Reviews
There are no reviews yet.