roadly
roadly

RynoWorx SealCoat Sprayer – For Drums

CQF-1H Asphalt Sealer CQF-1H Asphalt Emulsion
RynoWorx SealCoat Sprayer System For 275 Gallon Totes RynoWorx SealCoat Sprayer System For 275 Gallon Totes
0 out of 5
( There are no reviews yet. )

Price range: $2,249.00 through $2,699.00

The Rynoworx Drum Sprayer Kit for water based asphalt sealer offers the most budget-friendly entry point into professional asphalt sealing right now.

This compact, easy-to-use machine lets you mix and apply sealer straight from any standard 205-litre (55-gallon) drum — no need for expensive bulk tanks or large setups. It delivers consistent, high-quality results that rival bigger systems, all while keeping your investment low and your equipment footprint minimal.

Its lightweight, portable design makes transport a breeze: simply load it onto a small trailer or the bed of your pickup truck. The built-in re-circulation system gets everything thoroughly mixed in under 5 minutes, so you’re up and sealing almost immediately.

Perfect for beginners, small contractors, or property maintenance teams looking for reliable performance without the high costs or complexity of industrial-grade equipment.

  • Mix & Spray Asphalt Emulsion Sealer From 55 Gallon Drums
  • Seal up to 6500 Square Ft with each 55 gallon barrel of sealer
  • Easy to operate
  • Compatible With Water Based Seal Coat Products
  • Low Cost Option To Get Started With Professional Seal Coating Results

** Compatable with waterbased & acrylic based sealers only. Do not use with oil based sealers. Do not use sand with this seal coating spray system.

 

*** free shipping offer not valid for shipments to Northwest Territories, Yukon, Newfoundland, or PEI

 

 

 

SKU: A9550 Category:
Add to wishlist

Description

FAQ

Can I add sand to my sealer with this spray system?

The Rynoworx barrel spray system is not designed to spray sealer mixed with sand. Sand can be applied by a seeding machine after the first coat and before the second coat.

Do I need to prime the pump?

Yes. Failure to prime the pump prior to engine operation will destroy the pump seals. NEVER run the pump dry for
longer than 10 seconds.
NOTE: FAILURE TO PRIME THE PUMP WILL VOID THE SEAL WARRANTY.
-Always start the pump in full recirculation mode
-Switch the pump to recirculate mode if you are not going to be spraying for more than 30 seconds

NOTE: Failure to do so may result in excessive heating of the sealant, which will cause it to thicken and
reduce the lifespan of pump parts.
-Turn the engine off for extended work stoppages, such as breaks, lunches, or other work stoppages.

Your spray system uses a CENTRIFUGAL pump, commonly known as a "TRASH PUMP". This style of pump
requires priming before use. These pumps are NOT self priming and cannot move air.
To prevent damage to your pump, you must make sure that your pump and intake lines are full of water or
sealant before you use them. Running the pump dry will cause damage to the pump components.
The pump can lose their prime over time, and you may have to re-prime if you do not use the system regularly.

1. Disconnect the intake hose from the top of the barrel
2. Make sure the top of the hose is above the height of the pump
3. Fill the hose with water
4. Reconnect it to the barrel
5. Begin your work as usual

How do I unclog my spray tips?

-Place spray tips into a soapy water solution at the end of each day
-Do not let sealant dry onto your spray tips
-Put spray tips into a container with soapy water when finished with them
-Clean spray tips with soft nylon brushes only

Do I need to flush my sprayer after each use?

-Flush clean water through the pump and hoses at the end of each day.

Why am I getting an uneven spray pattern?

The most likely scenario is you have a clogged tip or it is worn out. First try cleaning the tip, if that does not work try replacing it. Purhcasing the optional filter kit is a good idea to increase the chances of flakes or chunks reaching the tip. 

Additional information

Weight 70306.0 g
Dimensions 91.44 × 53.34 × 60.96 cm
Pump / Motor Options

Base Model – 7 HP Launtop Engine, Aluminum Pump, Premium Model – 7 HP Launtop Engine, Cast Iron Pump, Pro Model – 5.5 HP Honda Engine, Cast Iron Pump

Reviews

There are no reviews yet.

Be the first to review “RynoWorx SealCoat Sprayer – For Drums”

Drum Sealer Operators Manual

Drum Sealer Quick Start Guide

Drum Sealer Operations Guide

Drum Sealear Maintenance Guide

Drum Sealer Troubleshooting Guide

Launtop Engine With Aluminum Pump Parts List

Launtop Engine With Cast Iron Pump Parts List