CRF Asphalt Rejuvenator
$450.00
Asphalt Millings Rejuvenator – Restore Binding Power for Stronger Asphalt Repairs
Revive and strengthen aged or oxidized asphalt with this asphalt millings rejuvenator, an essential solution for infrared patching, pothole repair, and new driveway installations. Designed to restore lost binders in recycled asphalt, this product helps you create a more cohesive, durable surface with improved workability and adhesion.
What Does an Asphalt Rejuvenator Do?
Over time, asphalt millings can become dry, brittle, and gray, indicating the loss of essential oils, bitumen, and bonding agents. This asphalt-based rejuvenator reintroduces the critical binders needed to reactivate old millings, improving compaction and delivering a richer, darker finish that looks like fresh asphalt.
Key Benefits:
-
Boosts bonding and flexibility in recycled asphalt millings
-
Essential for infrared patching and pothole filling
-
Water-dilutable (80% rejuvenator / 20% water) for easy application
-
Low odor, user-friendly asphalt emulsion
-
Application rate of 0.10 L per square foot
Whether you’re working on residential driveways, commercial lots, or road repairs, this rejuvenator helps maximize the value of reclaimed asphalt materials by improving their performance and appearance.
Rejuvenate. Rebind. Reuse. Get longer-lasting results from your asphalt millings with this high-performance rejuvenator.
- Description
- Additional information
- Reviews (0)
Description
What a rejuvenator does to old asphalt
Asphalt fails from the top down as the light oils in the binder oxidize and leave. The surface turns grey, loses flexibility, and starts to ravel: aggregate works loose, cracks open, and water gets into the base. Reclaimed millings go the same way in the stockpile, which is why a pile that has sat through a summer compacts poorly and will not knit together.
CRF puts the binder back. It is an asphalt based emulsion that soaks in, softens the aged bitumen, and restores the bond between the aggregate and the binder so the material compacts tight and holds.
Where contractors use it
- Infrared patching. Spray the raked area and the heated edge around it just before the new material goes down, then compact.
- Pothole repair. Treat reclaimed millings going into the hole for a patch that stays put.
- Millings driveways and lots. Rejuvenate recycled asphalt before compaction for a darker, tighter surface that sheds water.
- Stockpiled millings. Bring a dried out pile back to a workable state before it goes down.
Mixing and application
CRF is mixed with water at 80% rejuvenator to 20% water, as shown on the pail label, and applied with a sprayer, watering can or squeegee depending on the size of the job. The label application rate is 0.10 L of mix per square foot. It is a low odour, water dilutable emulsion, so there is no heating and no solvent smell on site. Work it in before compaction while the material is still loose.
Specifications
| Container | 5 gallon pail |
|---|---|
| Mixing ratio | 80% rejuvenator, 20% water |
| Application rate | 0.10 L per square foot |
| Application | Sprayer, watering can or squeegee |
| Type | Asphalt based emulsion, low odour |
Want to see how a rejuvenator fits into an infrared repair? Read our infrared asphalt repair guide.
Frequently Asked Questions
What does an asphalt rejuvenator do?
It puts back the binder that oxidizes out of old asphalt and stockpiled millings, so the material compacts tight, holds together and goes darker. CRF is a low odour, water dilutable asphalt emulsion.
How do I mix and apply CRF?
Mix 80% rejuvenator to 20% water, as on the pail label, and apply 0.10 L of mix per square foot with a sprayer, watering can or squeegee. Work it in before compaction while the material is loose.
Will it work on a sealed parking lot?
A rejuvenator treats the asphalt itself. A lot that has been sealcoated has a coating over the asphalt, so a sealer is the product for that surface, not a rejuvenator.
How soon can the surface take traffic?
It needs to cure before traffic. Cure time depends on temperature, humidity and how heavily it was applied.
Does it fix cracks?
No. Cracks get a crack filler. A rejuvenator restores the binder in the asphalt around them.
Additional information
| Weight | 21319 g |
|---|---|
| Dimensions | 31.0 × 31.0 × 41.0 cm |
Reviews
There are no reviews yet.