ISP Waterborne Traffic Paint (Yellow)
$159.95
Engineered for parking lots, highways, municipal roads, and airports markings. ISP Arcticline Water based Traffic Paint is the professional’s choice for machine applied striping. Featuring FlowGuard double-filtration technology, this advanced waterborne traffic paint is purpose formulated for use with Titan and Graco line painting machines. By eliminating the fine particulates that cause tip clogs and filter blockages, your equipment runs cleaner, longer, and with fewer interruptions.
FlowGuard Formula flows smoothly through your machine’s internal filtration system, protecting your tips and keeping you productive on the job. Whether you’re striping a small commercial lot, an airport, or a large-scale paving project, you get consistent, crisp lines from the first stall to the last. Fast-drying and built for durability, it delivers the performance and reliability that contractors, public works departments, airports, and property owners depend on.
- This formulation of ISP Waterborne Traffic Paint is made to be fast drying, and dries to touch in less than 5 minutes. This fast dry paint offers all the benefits of waterborne paint making ideal for the environment.
- Designed with durability in mind.
- Environmentally Friendly.
- Dries fast to minimize down time.
- Alberta Transportation Approved
- MPI (Master Painter Institute) Approved
- BC Ministry of Transportation Approved
- Manitoba Transportation Approved
- FlowGuard double-filtration technology — purpose-built to run cleanly through Titan and Graco line painting machines
- Available in white and yellow — covers the full range of parking lot striping and safety marking requirements
- Clog-resistant performance — double filtration removes fine particulates before they reach your tips, dramatically reducing downtime
- Machine-compatible viscosity — flows smoothly through equipment filtration systems without thinning or special preparation
- Crisp, uniform lines — consistent film build and clean edge definition from the first stall to the last
** Call or email us for discounted full pallet pricing (18 pails or more) **
- Description
- Additional information
- Reviews (1)
- Documents
Description
Frequently Asked Questions
What is ISP Waterborne Traffic Paint (Yellow) used for?
Yellow ISP Arcticline waterborne traffic paint is used for markings that require high visibility and a cautionary colour, including curb painting, fire lane markings, no-parking zones, centerlines, and directional arrows. It's suited to parking lots, municipal roads, highways, and airport surfaces, and is applied with airless or air atomized line striping equipment.
How is this different from a standard traffic paint?
The paint uses FlowGuard double-filtration technology, which removes fine particulates before they reach your sprayer tip. That means fewer clogs and filter changes during a job, which matters most on longer runs where a clogged tip can mean an uneven line or a full stop to clear it. It's purpose-built to run cleanly through Titan and Graco line painting machines.
How fast does it dry?
It dries to touch in under 5 minutes under normal conditions. Drying slows in high humidity above 65 percent, so plan striping windows around weather rather than the clock alone.
What application conditions does it need?
Apply at temperatures above 10 C. New asphalt or concrete needs a minimum 30-day cure before painting, and application should be avoided if rain is in the forecast. Don't heat the application system above 45 C, since this is a ready-to-use formula, not one requiring thinning or heating to spray temperature.
Do I need to thin the paint before use?
No. This is a ready-to-use product. Do not thin with water, as this affects film build, dry time, and reflectivity if beads are applied. Mix for 5 to 10 minutes before loading it into your sprayer.
Is it approved for government and municipal contracts?
Yes. It carries Alberta Transportation approval, MPI (Master Painters Institute) approval, BC Ministry of Transportation approval, and Manitoba Transportation approval, making it suitable for public works and provincial contract specifications.
Do I need to add glass beads?
Glass beads are optional and depend on whether the job spec requires retroreflectivity. If beads are used, apply them at a minimum rate of 0.6 g per litre of wet paint, with the paint applied at a recommended wet film thickness of 15 mils.
What's the VOC content, and is it environmentally friendly?
VOC content is below 150 g/L, and the formula is waterborne rather than solvent based, which is why it's positioned as the environmentally friendly option between the two paint types Roadly carries.
How is it packaged, and does it come in other colours?
This SKU (ISP-WB-Y) ships in a 20L pail. The same formulation is also available in white for parking stall lines and general markings. Full pallet pricing (18 pails or more) is available by calling 587-882-7623 or emailing support@roadly.ca.
AVAILALBE COLORS
- White
- Yellow
Additional information
| Weight | 33000.0 g |
|---|---|
| Dimensions | 31.0 × 31.0 × 41.0 cm |
Martin –
I could not find paint anywhere this season, and Roadly had ISP paint in stock so I decided to give it a try. Working with waterborne took a bit of getting used to, but overall it’s a great product. I ran ISP waterborne in my 3500 all season, and was very happy with it. Thank for the help and recommendation Michael! I will be running ISP waterborne paint for my jobs again next season.