HOT

Torpedo Bolts – Heavy-Duty Concrete Screw Anchor (8″ x 1/2″)

$3.99

Our concreted and asphalt anchors are high-performance, designed for secure fastening in both cracked and uncracked concrete , and asphalt. Its self-cutting design minimizes expansion forces, making it ideal for mounting traffic signs, parking lot signs, and rubber curbs

  • Recommended for Rubber curbs, and signs.
  • Standardized Installation – Designed for compatibility with ANSI tolerance drill bits for hassle-free application.
Availability: In stock SKU: R85CSA Categories: ,

    Description

    Concrete Anchor Installation Instructions

    1. Drill a hole in the base material using a carbide drill bit (complying with ANSI B212.15) with the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.
    2. Insert the anchor through the fixture and into the hole.
    3. Tighten the anchor into the base material until the hex-washer head contacts the fixture.

     Caution

    • Holes in steel fixtures to be mounted should match the diameter specified in the table below if steel is thicker than 12 gauge.
    • Use a Titen HD screw anchor one time only — installing the anchor multiple times may result in excessive thread wear and reduce load capacity.
    • Do not use impact wrenches to install into hollow CMU.
    • Oversized holes in base material will reduce or eliminate the mechanical interlock of the threads with the base material and reduce the anchor’s load capacity.
    • Installation of concrete screw generally is influenced by many factors such as but not limited to, concrete compressive strength, type of aggregate, installation location, installation direction and tools used for installation.

    Additional information

    Weight 250.0 g

    Reviews

    There are no reviews yet.


    Be the first to review “Torpedo Bolts – Heavy-Duty Concrete Screw Anchor (8″ x 1/2″)”