14″ Steel Snow Plow Base Plate For IRWL
Virtually indestructible, it is the ideal solution for snowy regions where snow removal equipment is used on the roadway.
Made from high strength case-hardened steel with two outer coats of corrosion resistant steel primer, our 30 lb. 14″ snow plow blade resistant base plate is the most durable base plate on the market.
- The 14″ snow plow blade resistant base plate is used to secure and protect our 9X LED LightStar™ & DuraFlash LGS-M10 IRWL light fixtures.
- Debris Free Self Clearing Design
- Can be installed in concrete or asphalt
- Shallow depth ensures road surface is not compromised
- Virtually indestructible
- Reviews (0)
Two part epoxy compound is used to permanently to embed the 14″ steel case-hardened snow plow base plate into the roadway. The base plate can be installed into asphalt or concrete.
The in-roadway warning light system cable conductors are also embedded into the road via direct burial or in conduit. The base plate interior cavity is designed to contain all the electrical wiring for a signal head module. An elastomer O ring is placed between the signal head and the base plate and helps to create a seal.
During manufacturing, four rust proof brass threaded screw receptacles are inserted into the bottom side of the base plate. This feature prevents the mounting screws from being pulled out of the base plate. The signal head is fastened to the base plate with stainless steel socket head 1/4″-20 screws with thread lock, and anti-seize compound is applied to the brass threads in the factory.